SDEKON XNR-400E Touch Screen Digital Display Plastic Melt Flow Index Tester

1.Applications:

SDEKON XNR-400E Touch Screen Digital Display Plastic Melt Flow Index Tester meet GB/T3682-2000,

ASTM D1238-98, JB/T5456, JB/T5456 and ISO1133 standards; used to determination of melt mass flow

rate (MFR, Unit: g/10min) and melt volume flow rate (MVR, Unit: cm3/10min) of thermoplastics.

Using automatic sampling to determination of melt mass flow rate, balance weighing way.

Through the photoelectric encoder and automatic timing system to measure the melt volume flow rate.

First to measure the time for the piston to move in the specified distance, then calculated the volumetric

flow rate according to the formula.

The final result of both methods is shown on the touch screen and can output by the micro-printer.

2.Main Specification:

Model	XNR-400E
Test Method	Melt Mass Flow Rate (MFR) Melt Volume Flow Rate (MVR)
Temperature Range	Room Temperature - 400℃
Constant Temperature Accuracy	±0.2℃
Temperature Resolution	0.1℃
Display Method	Touch Screen Digital Display
Scraped Material Way	Automatic / Manual
Control 4h Drift By Temperature Control	No More Than ±0.2℃
Barrel Temperature Recovery Time After Feeding	≤ 4min
Timing Clock Range	0-3000s Arbitrarily Adjustable
Resolution Of Timing Clock	0.001s
Automatic Cutting	Set Interval Time