SDEKON XNR-400D Digital Display Plastic Melt Flow Index Tester

1.Applications:

SDEKON XNR-400D Digital Display Plastic Melt Flow Index Tester meet GB/T3682-2000, ASTM D1238-98,

JB/T5456 and ISO1133 standards; used to determination of the melt mass flow rate (MFR, Unit: g/10min)

and the melt volume flow rate (MVR, Unit: cm3/10min) of thermoplastics.

Using automatic sampling to determination of melt mass flow rate, balance weighing way.

To measure the melt volume flow rate is through the displacement sensor and automatic timing system,

first to measure to time of the piston moves a specified distance, then calculate the volume flow rate

according to the formula. The final result of two determination methods is displayed on the LCD screen

and can output by the micro-printer.

2.Main Specification:

Model	XNR-400D
Test Method	Melt Mass Flow Rate (MFR) Melt Volume Flow Rate (MVR)
Temperature Range	Room Temperature - 450℃
Constant Temperature Accuracy	± 0.2℃
Temperature Resolution	0.1℃
Display Method	Digital Display
Scraped Material Way	Automatic / Manual
Displacement Range	0.01 - 50mm
Displacement Accuracy	± 0.01 mm
Displacement Resolution	0.01 mm
Timing Range	0.1 ~ 999s
Timing Accuracy	0.1s
Cut Material Way	Automatic and Manual Cut Material Way